Set The Registrar; Set The Registrar Port; Set The User Id; Set The User Password - NEC UX5000 Easy Setup Manual

Chapter 2 - MH240 Setup
2.1.1.7.4
2.1.1.7.5
2.1.1.7.6
2.1.1.7.7
2 - 12

Set the Registrar:

Factory Default: 172.16.0.10 (1.NEC-SETUP)
1. Press 4 (Registrar) to go to the Registrar Edit screen.
2. Edit the Registrar (the IP address of the UX5000 as configured in Program 10-12-
09) and then press the "OK" soft key.
3. Continue with the next feature or press the Power/On-Hook key and 2 to save.
Pressing the Power/On-Hook key and 1 will cancel any entered changes.

Set the Registrar Port:

Factory Default: 5070
1. Press 5 (Registrar Port) to go to the Registrar Port edit screen.
2. Edit the Registrar Port (ex. 5070) and then press the "OK" soft key.
3. Continue with the next feature or press the Power/On-Hook key and 2 to save.
Pressing the Power/On-Hook key and 1 will cancel any entered changes.

Set the User ID:

Factory Default: -
1. Press 6 (User ID) to go to the User ID edit screen.
2. Edit the User ID and then press the "OK" soft key.
3. Continue with the next feature or press the Power/On-Hook key and 2 to save.
Pressing the Power/On-Hook key and 1 will cancel any entered changes.

Set the User Password:

Factory Default: -
1. Press 7 (User Password) to go to the User Password edit screen.
2. Edit the User Password and then press the "OK" soft key.
3. Continue with the next feature or press the Power/On-Hook key and 2 to save.
Pressing the Power/On-Hook key and 1 will cancel any entered changes.
* Optional for MH240 registration *
* Optional for MH240 registration *
Chapter 2