NEC UX5000 Easy Setup Manual page 30

Chapter 2 - MH240 Setup
2 - 6
WPA: TLS: Factory Default: WPA2-PSK (1.NEC-SETUP), OPEN (2 to 9)
1. Press 3 (Security) to go to the Security setting screen.
▲
2. Press to select "WPA" and then press the round OK key.
▼
▲
3. Press to select an encryption "1.TKIP" or "2.AES" and then press the round OK key.
▼
4. Press 1 (EAP) + 1 (TLS) to set EAP type to TLS.
5. Press 2 (Identity) to go to the Identity edit screen.
6. Edit the Identity and then press the "OK" soft key.
7. Press 4 (Password) to go Password edit screen.
8. Edit the Password and then press the "OK" soft key.
9. Press 5 (CA Cert.) + 1 (Set Cert.) then "OK" to set CA Certificate (cacrt.pem).
10. Press 6 (User Cert.) + 1 (Set Cert.) then "OK" to set User Certificate (usercrt.pem).
11. Press 7 (Private Key) + 1 (Set Cert.)
(userkey.pem).
12. Press HOLD as needed to exit back to the Profile Setting (
13. Continue with the next feature or press the Power/On-Hook key and 2 to save.
Pressing the Power/On-Hook key and 1 will cancel any entered changes.
NOTE: You should upload CA Certificate "cacrt.pem", User Certificate "usercrt.pem" and
Private Key "userkey.pem" to MH240 in advance by using IP Phone Manager for MH240.
WPA2: PEAP: Factory Default: WPA2-PSK (1.NEC-SETUP), OPEN (2 to 9)
1. Press 3 (Security) to go to the Security setting screen.
▲
2. Press to select "WPA2" and then press the round OK key.
▼
▲
3. Press to select an encryption "1.TKIP" or "2.AES" and then press the round OK key.
▼
4. Press 1 (EAP) + 2 (PEAP) to set EAP type to PEAP.
5. Press 2 (Identity) to go to the Identity edit screen.
6. Edit the Identity and then press the "OK" soft key.
7. Press 4 (Password) to go Password edit screen.
8. Edit the Password and then press the "OK" soft key.
9. Press 5 (CA Cert.) + 1 (Set Cert.) then "OK" to set CA Certificate (cacrt.pem).
10. Press HOLD as needed to exit back to the Profile Setting (
11. Continue with the next feature or press the Power/On-Hook key and 2 to save.
Pressing the Power/On-Hook key and 1 will cancel any entered changes.
NOTE: You should upload CA Certificate "cacrt.pem" to MH240 in advance by using IP
Phone Manager for MH240.
then "OK" to set Private Key
Prof. Setting
Prof. Setting
Chapter 2
) screen.
) screen.