R Type - TOHATSU BFT 75A Owner's Manual

Cruising (R type)
(R1 type) (R2 type)
POWER TRIM/ POWER TRIM/
TILT SWITCH TILT SWITCH
1. Press the DN (down) of the power
trim/tilt switch and trim the
outboard motor at the lowermost
position.
LOWERMOST
POSITION
R3 type:
When the two outboard motors are
mounted:
1)Press the DN (down) of the power
trim/tilt switch on the control lever
and trim the outboard motors at the
lowermost position.
(R3 type)
(single type)
POWER TRIM/ POWER TRIM/TILT SWITCH
(LEFT)
TILT SWITCH
2)With the outboard motors trimmed
at the lowermost position, adjust
the trim angle of the right and left
outboard motors using the switch
on the control lever simultaneously.
OPERATION
(dual type)
(RIGHT)
95