TOHATSU BFT 75A Owner's Manual page 83

Hide thumbs Also See for BFT 75A:
Table of Contents

Advertisement

STARTING THE ENGINE
OIL PRESSURE
INDICATOR
NORMAL: ON
ABNORMAL: OFF
80
5. Check to see if the oil pressure
indicator turns ON.
If it does not turn ON, stop the engine
and perform the following
inspections.
1)Check the oil level (see page 56).
2)If the oil level is normal and the oil
pressure indicator does not turn
ON, consult with an authorized
TOHATSU outboard motor dealer.
6. Warm up the engine as follows:
Above 5°C (41°F) – run the engine
for at least 3 minutes.
Below 5°C (41°F) – run the engine
for at least 5 minutes at approx.
-1
2,000 min
(rpm).
Failure to completely warm up the
engine will result in poor engine
performance.
If the engine is not properly
warmed-up before raising the
engine speed, the warning buzzer
and overheat indicator may
activate and the engine speed will
be automatically reduced.
Before leaving the dock, check the
operation of the emergency stop
switch.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft 90a

Table of Contents