TOHATSU BFT 75A Owner's Manual page 99
Hide thumbs
Also See for BFT 75A:
- Service manual (609 pages) ,
- Owner's manual (160 pages) ,
- Owner's manual (144 pages)
Table of Contents
Advertisement
OPERATION
(R1 type)
NEUTRAL
REVERSE
FORWARD
FORWARD
REMOTE
CONTROL
LEVER
FORWARD
2. Move the control lever from
NEUTRAL toward FORWARD
position.
R1 type:
Moving about 30° engages the
gear. Moving the control lever
further opens the throttle and
increases the engine speed.
96
(R2 type)
REVERSE
NEUTRAL
FORWARD
REMOTE
CONTROL
LEVER
FORWARD
R2, R3 types:
Moving about 35° engages the
gear. Moving the control lever
further opens the throttle and
increase the engine speed.
For the sake of fuel economy, open
the throttle about 80%.
(R3 type)
NEUTRAL
REVERSE
FORWARD
• When cruising at full throttle, note
that the engine speed must be in the
range.
• If you feel that the engine speed
jumped up when the hull jumped or
at ventilation, cruise the boat by
returning the throttle to the slow
speed side.
• See "Propeller Selection" (see page
55) for a relation between the
propeller and the engine speed.
Do not operate without the engine
cover. Exposed moving parts could
cause injury; water may damage
the engine.
For best performance, passengers and
equipment should be distributed
evenly to balance the boat.
Advertisement
Table of Contents
