Fuel - TOHATSU BFT 75A Owner's Manual

Hide thumbs Also See for BFT 75A:
Table of Contents

Advertisement

Oil filler cap installation (Lock):
1)Insert the oil filler cap into the oil
filler port with the lug being set
horizontally.
2)Turn the oil filler cap 90°
clockwise so the lug of the cap is in
line with the rib of the ACG cover.
(It should click.)
4. Install the engine cover and lock it
securely.
Do not overfill the engine oil.
Check the engine oil after refilling.
Excessive engine oil as well as the
insufficient oil could cause damage
to the engine.

Fuel

(Fuel Tank equipped type)
UPPER LEVEL
FUEL GAUGE
Check the fuel gauge and refill the
tank to the upper level mark if
necessary. Do not fill the fuel tank
above the UPPER level mark.
Open the vent knob before removing
the fuel filler cap. When the vent
knob is firmly closed, the cap will be
difficult to remove.
PRE-OPERATION CHECKS
Fuel tank capacity (separate tank):
25 L (6.6 US gal, 5.5 Imp gal)
(Using the fuel tank mounted on
the boat)
Check the fuel level and refill if
necessary. Do not fill the fuel tank
above the UPPER LIMIT.
Refer to the boat manufacturer's
instructions.
Use unleaded gasoline with a
Research Octane Number of 91 or
higher (a Pump Octane Number of 86
or higher). Use of leaded gasoline
may cause damage to the engine.
Never use an oil/gasoline mixture or
dirty gasoline. Avoid getting dirt, dust
or water in the fuel tank.
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft 90a

Table of Contents