Add Effects To The Selected Sound - GEM RP220 Owner's Manual

Holding the BALANCE
second sound (split or layer) continually and at the same time,
decreases the volume of the main sound proportionally.
If you select a Single Preset (or deactivate the SPLIT or LAYER
button), the BALANCE buttons operate as normal Volume controls
for the main section.
Pressing either Balance button activates the corresponding Sound
Volume display:
•

Add effects to the selected sound

You can easily add effects to the selected sound by using the REVERB
and EFFECTS buttons in the CONTROL section.
To add Reverb:
• Press the REVERB button (the LED turns on).
A temporary display activates showing the Reverb Type currently
assigned to the GrandPiano sound, in this case Hall 1 (shown
selected in negative highlight):
To add Effect (chorus/delay/modulation):
• Press the EFFECT button (the LED turns on).
A temporary display activates showing the Effect Type currently
assigned to the GrandPiano sound, in this case Chorus 1 (shown
selected in negative highlight):
Note. It is possible to add either Reverb, or Effect, or both effects
to a single sound, to a Split or Layer Preset and the settings can be
memorized.
button down increases the volume of the
11