Selecting The Rp220 Presets - GEM RP220 Owner's Manual

Selecting the RP220 Presets

The RP220 contains 64 Internal Presets, consisting of single, split and
layered sound combinations which incorporate appropriately memorized
volume, balance, effect settings and more. An additional 64 User Preset
locations are available with as many sound variations and combinations,
where you can store your preferred programmed sound settings. The
Presets and User Presets are organized in the Selection section.
The Selection buttons
This section consists of a lower row of 8 Preset "family" Groups and an
upper row of 8 Presets of the selected Preset Group.
Presets
Preset
Groups
On the right are the Preset/User Preset button and the GrandPiano
button. The GrandPiano button sets the instrument to play the default
GrandPiano sound instantly, returning the instrument to Single Preset
mode from any situation.
When the LED of the Preset button is off, the sounds recalled relate to the
internal Presets.
When the User Preset LED is on, the sounds recalled are user memorized
Presets.
The 8 Preset Group buttons are marked as follows: Acoustic Piano,
Electric Piano, Keyboard, Organ, Strings, Choir\Pad, Guitar, Vibes.
The 8 buttons of the upper row select 8 different Presets of the currently
selected Preset Group and are factory-set to recall Presets in the
following manner:
1 2 3 4 5 6 7 8
Single Single Single Single Layer Layer Split Split
Each Preset of the current Group contains a memorized Layer and Split
sound combination which you can recall in real time by activating the
appropriate buttons.
Similarly, a Layer or Split Preset is easily converted to one of the other
modes by activating/deactivating the Split or Layer buttons accordingly.
For example, if you have selected the Layer Preset 5 of a Preset Group,
simply press SPLIT to recall the memorized Split combination, or deac-
tivate LAYER to recall the memorized Single sound.
When you select a Preset Group from the lower row for the first time after
turning on, Preset n. 1 of the upper row is automatically selected by
default.
12