Table of Contents
Advertisement
6.
With the Cursor Down button, select the last item of the display if you
want to activate one of the three Repeat options available:
The default setting of Repeat is Off.
7.
Use the Data +/– buttons to select the repeat option desired. The
options available are:
SINGLE: the selected pieces repeats after playback;
ALL:
All the sequences within the selected group repeat after
playback;
RANDOM: the sequences available in the Library playback in ran-
dom order.
The last selection made is memorized even after turning
the instrument off.
To listen to a sequence from the Song Library
8.
Once you have selected a sequence, press the Play/Stop button to
start the playback. The display will change to the standard sequencer
display showing the title of the sequence, the time signature, tempo
and measure counter:
All the sequences available are two-track recordings, divided into
left and right hand sequences.
While the sequence is playing, you can mute either left (Track1) or
right hand (Track2) as required and play along with any Preset you
wish.
You can activate the Metronome, change the Tempo, use the REW/
FF buttons and also Transpose (Transpose b /# buttons) the piece
according to your requirements.
Playback continues till it reaches the end. If Repeat is off, the
sequence stops and the display returns to the Song Library situation
where you can select another piece.
If you have selected one of the Repeat options, playback continues
depending on the option selected.
9.
To stop the playback of the sequence playing, press the Play/Stop
button.
Note: You'll find a list of Songs contained in the Song Library in
Section 7 "Reference".
68
SONG LIBRARY
FOLDER:
TEACHING
GROUP :
CESI_MARCIANO
TITLE :
CESI_0001
REPEAT:
OFF
Advertisement
Table of Contents
