Figure 30. Pivoting the drive bay assembly upward
7. Disconnect the internal speaker cable from the internal speaker connector on the system board. See
"Parts on the system board" on page 35.
8. Press the tab
1
on the inner side of the front panel and slide the internal speaker as shown to
completely remove it from the chassis.
Figure 31. Removing the internal speaker
9. Position the new internal speaker into the four metal clips
slide the internal speaker as shown until it snaps into position.
Figure 32. Installing the internal speaker
100
ThinkCentre M800 and M900 Hardware Maintenance Manual
1
on the inner side of the front panel. Then,