T T u u r r n n y your P
Windows 98, ME, 2000,
Attach the front-panel overlay
Make sure you are using the
correct guide .
Windows users: Follow the steps in order.
Do not connect the USB cable until
instructed to do so.
See your box for exact contents and
Connect the USB cable and the power cord
Insert the print cartridges (continued)
Use the bright pink pull-tab to
remove the clear tape from the
print cartridges. Do not touch the
Hold the black print cartridge with the model type
gold-colored contacts or re-tape
on top. Slide the cartridge at a slight angle into
the right side of the print carriage. See the
instructions on the print cartridge access door.
Press firmly until the black print cartridge snaps
our PC C on
In Ins s t t a a ll t ll th h e e so soft ftw w are first
Turn your PC on and wait for the
Windows desktop to appear.
Close any open programs,
including virus-checking programs.
(Chinese user skip this step)
Do not connect the USB
cable until you see the
screen in Step 2. Do not
connect the USB cable
to a keyboard or non-
Repeat steps C and D with the color
print cartridge. Make sure both
cartridges are secure.
Do not connect the USB cable at
Insert the driver CD.
this time. Please wait while the
software installs files. This can take
Follow the onscreen instructions.
up to 20 minutes on slow PCs.
Click "English" then click "software
When you see the screen to the
right, continue to step 3.
Lower the input tray and the print
cartridge access door. Remove
the packaging. Close the print
cartridge access door.
Remove the front-panel overlay
from the barcode backing.
Raise the lid. Align the overlay
with the recessed area on the unit
next to the buttons. Press the
overlay firmly into place.
Turn on your M8XX
The On light button turns
green. This may take a few
Align print cartridges
For best print quality, follow
Close the print cartridge
door. A print cartridge
alignment page prints. This
may take up to a minute. Use
this page in step 8.
If nothing appears on your
computer screen after inserting
the CD, search for setup.exe
on the CD and double-click the
Load plain white paper
Insert the print cartridges
Pull the print cartridge access
door down. Wait for the print
carriage to move to the center.
Finish software setup
Look for the screen with the green
checkmark, and then continue. If
you see the screen with the red "X",
follow the instructions in the
Try the Lenovo M8xx
Place the page face down
at the front left corner.
Close the lid.
Press the Scan to PC button.
Congratulations! You are
now ready to use the
After the ON light stops
Make sure there are five icons in
blinking, alignment is
the Lenovo MFP Solution Center
Lenovo MFP Solution Center
complete. Discard or recycle
icon to get started.
If not, see the reference guide.