9. Remove the four screws
drive to remove it from the bracket.
Figure 53. Removing the 2.5-inch storage drive from the bracket
10. Take the new 2.5-inch storage drive out of the static-protective package.
11. Align the two pins in the storage drive bracket with the corresponding holes in the new storage drive.
Then, pivot the storage drive downward until it snaps into position and install the fours screws
secure the storage drive to the bracket.
Figure 54. Installing the 2.5-inch storage drive into the bracket
112
ThinkCentre M800 and M900 Hardware Maintenance Manual
1
that secure the 2.5-inch storage drive to the bracket. Then, lift up the storage
1
to