Understanding The System Status Leds; Figure 20: System Status Leds; Table 8: System Status Leds - Edge-Core ECS4210-12P Installation Manual

Chapter 6
| Switch Management

Understanding the System Status LEDs

Understanding the System Status LEDs
The switch includes a display panel of key system LED indicators. The LEDs, which
are located on the front panel, are shown below and described in the following
table.

Figure 20: System Status LEDs

1
System Status LEDs
(

Table 8: System Status LEDs

LED Condition
Pwr On Green
Off
Diag On Green
(Diagnostic)
On Amber
Blinking Amber
Blinking Amber and
Green
On Amber
PoE Status a
Amber Blinking
Off
a. Diag LED with PoE button pressed
Status
Internal power operating normally.
No AC power is connected or the internal power supply
has failed.
The system diagnostic test has completed successfully.
System diagnostic in progress.
The system self-diagnostic test has detected a fault.
The switch system is booting up.
Port LEDs display the individual port's PoE status.
The PoE device power draw on the switch has reached at
least 95 percent of the maximum switch power output
capacity.
Port LEDs display the individual port's link and activity
status
– 42 –
1