Chapter 1
| Switch Description
Overview
Key Hardware
Components
Figure 1: Front Panel ECS4210-12P
Port LEDs
1
2
1000BASE-T RJ-45 PoE Ports
3
1000BASE-T RJ-45 Uplink Ports
4
Gigabit SFP Slots
The switch consists of several key hardware components. This manual describes
each specific component, or related components, together with their installation
requirements and procedures in each chapter. To understand each component in
detail, refer to the relevant section.
10/100/1000BASE-T RJ-45 Ports
The switch contains ten 10/100/1000BASE-T RJ-45 ports that support 10/100/
1000BASE-T copper links to other devices. For more information, see
Connect to Twisted-Pair Copper Ports" on page
Gigabit SFP Slots
The switch contains two Small Form Factor Pluggable (SFP) transceiver slots that
operate up to 1 Gbps full duplex. For more information, see
Fiber Optic Ports" on page
PoE Button
Pressing the PoE button on the ECS4210-12P front panel changes the port LEDs to
display PoE status. For more information, see
LEDs" on page
42.
1
2
RJ-45 Console Port
5
6
PoE Button
7
Reset Button
8
System LEDs
34.
38.
"Understanding the System Status
– 10 –
3
5
4
6
"How to
"How to Connect to SFP
7
8