AJA KONA 4 Installation & Operation Manual page 87

Audio Input Analog
Audio Output Digital
Audio Output Analog
Down-conversion
Reference Input
Machine Control
KONA v12.4
• 2-channel, 24-bit A/D analog audio, 48kHz sample rate, balanced (via 2 x XLR on
breakout cable or optional KL-Box)
• +24dbu Full Scale Digital
• +/- 0.2db 20 to 20kHz Frequency Response
• 8-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous
• 2-channel, 24-bit AES/EBU audio, 48kHz or 96 KHz sample rate, Synchronous or Non-
synchronous, Internal sample rate conversion (via 1 x XLR on breakout cable or
optional KL-Box)
• 2-channel, 24-bit D/A analog audio, 48kHz sample rate, balanced (via 2 x XLR on
breakout cable or optional KL-Box)
• +24dbu Full Scale Digital (0dbFS)
• +/- 0.2db 20 to 20kHz Frequency Response
• 2-channel unbalanced output (via 2 x RCA jacks on optional KL-Box)
• Hardware 10-bit
• Anamorphic: full-screen
• Letterbox: image is reduced with black top and bottom added to image area with the
aspect ratio preserved
• Crop: Crop: image is cropped to fit new screen size
• Analog Color Black (1V) or Composite Sync (2 or 4V)
• Looping
• 75 ohm on optional KL-Box, terminated on supplied breakout cable
• RS-422, Sony 9-pin protocol (via DB-25 breakout cable or optional KLHi-Box)
• 9-pin D-connector pinout is as follows:
1 - GND
2 - RX-
3 - TX+
4 - GND
5 - No Connection
6 - GND
7 - RX+
8 - TX-
9 - GND
Shell - GND
87 www.aja.com