Downstream Keyer
Audio Input Digital
Audio Output Digital
SD to SD Aspect Ration
Conversion
Timecode
Machine Control
Reference Input
KONA v12.4
• 12-bit D/A, 8x oversampling
• +/- .2 dB to 5.0 MHz Y Frequency Response
• +/- .2 dB to 1 MHz C Frequency Response
• 5% 2T pulse response
• <1% Diff Phase
• <1% Diff Gain
• <1% ns Y/C delay inequity
• Supports graphics with alpha channel over video, matte or framebuffer, or framebuffer
content over incoming video or matte.
• 16-channel, 24-bit SDI embedded audio, 48kHz sample rate, Synchronous
• 8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous or Non-
synchronous, Internal sample rate conversion (via 4 x BNC on breakout cable)
• 16-channel, 24-bit AES/EBU audio, 48 kHz sample rate, Synchronous (via 8 x BNC on
optional K3G-Box)
• 16-channel, 24-bit SDI embedded audio, 48kHz sample rate, Synchronous
• 8-channel, 24-bit HDMI embedded audio, 48kHz sample rate, Synchronous
• 8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous or Non-
synchronous, Internal sample rate conversion (via 4 x BNC on breakout cable)
• 16-channel, 24-bit AES/EBU audio, 48 kHz sample rate, Synchronous (via 8 x BNC on
optional K3G-Box)
• Letterbox: This transforms SD anamorphic material to a letterboxed image.
• H Crop: Will produce a horizontally stretched effect on the image; transforms
anamorphic SD to full frame
• SD Pillarbox: Will produce an image in the center of the screen with black borders on
the left and right sides and an anamorphized image in the center
• V Crop: Will transform SD letterbox material to an anamorphic image.
• LTC timecode input and output (via 1 x BNC each)
• RS-422, Sony 9-pin protocol (via breakout cable or optional K3G-Box)
• 9-pin D-connector pinout is as follows:
1 - GND
2 - RX-
3 - TX+
4 - GND
5 - No Connection
6 - GND
7 - RX+
8 - TX-
9 - GND
Shell - GND
• Analog Color Black (1V) or Composite Sync (2 or 4V)
• Looping
• 75 ohm on optional K3G-Box, terminated on supplied breakout cable
82
www.aja.com