AJA KONA 4 Installation & Operation Manual page 85

Timecode
Reference Input
Machine Control
KONA v12.4
• V Crop: Will transform SD letterbox material to an anamorphic image.
• LTC timecode input and output (via 1 x BNC each)
• Analog Color Black (1V) or Composite Sync (2 or 4V)
• Looping
• 75 ohm on optional K3G-Box, terminated on supplied breakout cable
• RS-422, Sony 9-pin protocol (via breakout cable or optional K3G-Box)
• 9-pin D-connector pinout is as follows:
1 - GND
2 - RX-
3 - TX+
4 - GND
5 - No Connection
6 - GND
7 - RX+
8 - TX-
9 - GND
Shell - GND
85 www.aja.com