Color Space
RGB Range
Audio Channels
KONA LHi HDMI Input
Settings
KONA v12.4
Selects the HDMI output color space and depth. These are the choices:
• Auto–UDC automatically selects the mode based on getting the attached HDMI
device's EDID information. This is the recommended setting. The selected mode is
shown to the right of the pull-down control.
• RGB 8Bit–UDC uses 8-bit RGB mode regardless of the attached device's EDID.
• RGB 10Bit–UDC uses 10-bit RGB mode regardless of the attached device's EDID.
• YCbCr 10Bit–UDC uses 10-bit YCbCr mode regardless of the attached device's EDID.
The RGB Range pulldown menu allows you to select the type of RGB color output.
• SMPTE– (typically 64-940)
• Full–(0-1023)
An Audio Channel pulldown allows you to select the number of embedded audio
channels for the HDMI output.
The detected HDMI input video format is displayed and you're given pull-down menus to
configure the RGB range (SMPTE or FULL) and select any two embedded channel pairs
from those supplied for stereo output (if applicable).
50
www.aja.com