AJA KONA 4 Installation & Operation Manual page 27

KONA v12.4
2. Connect a Video Monitor to the KONA 4/3G Component Analog Video Out BNC
connectors (preferred), or instead connect to a composite monitor. (If you have an
SDI or HD-SDI enabled monitor, you may also connect one of the KONASDI outputs
to a monitor as well.)
3. Connect the 9-pin DE9 machine control cable on the supplied breakout cable to your
VTR's RS422 control port or connect a 9-pin DE9 cable between the breakout box and
the VTR's RS422 serial port.
4. Connect two SDI cables between KONA 4/3G and your digital VTR (Digital Betacam
etc.): one from KONA 4/3G SDI In to the VTR SDI Out, and one from KONA 4/3G SDI
Out (1 or 2) to the VTR SDI In. The KONA 4/3G SDI connections have embedded audio
(16-channels) so the VTR must be configured accordingly. These connections will be
made via the mini-connectors-to-BNC cable or via the optional K3G-Box.
5. If you have an AES/EBU-ready audio monitoring system, then connect the eight
channels of AES/EBU output from KONA 4/3G's BNC connectors: 1/2, 3/4, 5/6, and 7/
8, to the monitoring system AES/EBU inputs. If you have an analog audio monitoring
system, you can use the two RCA-style unbalanced stereo output jacks on the
optional K3G-Box for output.
27 www.aja.com