AJA KONA 4 Installation & Operation Manual page 66

Figure 30. Mapping of Quad SDI Outputs
Physical connections of the quadrants will be mapped to the KONA 4/3G SDI connectors
as shown. For the HDMI and Analog Outputs, you can from a variety of options for
viewing (see "HDMI Screen in 4K Mode" on page 70 and "Analog Output Screen in 4K Mode"
on page 71).
This section describes the AJA Control Panel operations specific to 4K Mode. Note that in
4K Mode, you can still capture and playback SD, HD, and 2K formats, though there are no
up/down/cross conversions available.
You will see SDI inputs only when SD, HD, or 2K inputs are selected. SDI Outputs 1 & 2 will
be reconfigured as SDI 1 & 2 Inputs on the screen.
Figure 31. HD SDI Input Format in 4K Mode
NOTE: Up, Down, and Cross Conversion are available only when the KONA 4/3G module has
Standard Mode firmware installed (see "Firmware Screen" on page 64).
KONA v12.4 66 www.aja.com