Analyzing Memory Messages - Beurer PM80 Operating Instructions Manual

Analyzing memory messages

In the menu
Training
memory is almost full or if almost all the laps are occupied.
Message
Read in the previous section "Delete all recordings" to find out how
to delete the memory manually.
The memory is also deleted every time the data is transferred to the
PC. You can find the relevant explanations in the chapter "EasyFit
Software".
your HR watch automatically informs you if the
Meaning
When switching to the menu
watch signals
the memory or less than 10 laps are free.
During training, the HR watch signals every 5
seconds
MEM x% Free
memory is free.
On the display:
During training the HR watch signals every 5
seconds
LAP Rest x
(of a total of 60) laps .
On the display:
34
, if less than 10% of
MEM LOW
, if less than 10% of the
MEM 8% Free
, if there are less than 10
(still 7 laps free).
LAP Rest 7
the HR
Training
(still 8% free).