Analyzing Memory Messages - Beurer PM 52 Operating Instructions Manual

Analyzing memory messages

In the menu
Training
memory is almost full or if almost all the laps are occupied.
Message
If the memory is full, you cannot start a new training session. Read
in the previous section "Delete all recordings" to find out how to de-
lete the memory manually.
The memory is also deleted every time the data is transferred to the
PC. You can find the relevant explanations in the chapter "EasyFit
Software".
your HR watch automatically informs you if the
Meaning
When switching to the menu
watch signals
MEM LOW
the memory or less than 10 laps are free.
During training, the HR watch signals every 5
seconds
MEM x% Free
memory is free.
On the display:
MEM 8% Free
During training the HR watch signals every 5
seconds
LAP Rest x
(of a total of 100) laps .
On the display:
LAP Rest 7
27
Training
, if less than 10% of
, if less than 10% of the
(still 8% free).
, if there are less than 10
(still 7 laps free).
G
B
the HR