Beurer PM80 Operating Instructions Manual page 44

appears. Step onto the scale bare-
foot. Pay attention that you are
standing calmly on the stainless
steel electrodes.
The scale calculates your weight and
START/STOP
your body fat and transmit both val-
ues to the monitor. For a short period
during the transmission horizontal
lines are shown on the display.
Please note that the body fat can
only be measured and transmitted, if
you have set the personal user data
on the scale. You can however also
transmit your weight without measur-
ing your body fat. Your weight is
automatically updated during the
measurement in the
Your weight which was calculated by
the scale
you do not measure your weight,
then the last weight stored will be
displayed.
Your body fat which was calculated
OPTION/SET
by the scale
you do not measure your body fat,
then the last body fat stored will be
displayed.
Press the button again and again
OPTION/SET
until your get into the main display.
Setting
is displayed. If
Weight[kg]
is displayed. If
BF[%]
43
menu.
G
B