Dvd Drive - HP 9000 rp4440 Maintenance Manual

DVD Drive

The DVD drive is located on the front of the HP Server.
WARNING Ensure that the system is powered down and all power sources have been
disconnected from the server prior to removing or replacing a DVD drive.
Voltages are present at various locations within the server whenever an AC power
source is connected. This voltage is present even when the main power switch is in
the off position.
Failure to observe this warning could result in personal injury or damage to
equipment.
CAUTION Failure to properly complete the steps in this procedure will result in erratic system behavior
or system failure. For assistance with this procedure contact your local HP Authorized Service
Provider.
Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
safety precautions could result in damage to the server.
Chapter 4
Removing and Replacing Components
DVD Drive
103