Quickfind Diagnostic Board - HP 9000 rp4440 Maintenance Manual

QuickFind Diagnostic Board

The QuickFind diagnostic board is located on top of the power supply cage, underneath the top cover.
WARNING Ensure that the system is powered down and all power sources have been
disconnected from the server prior to removing or replacing the QuickFind
diagnostic board.
Voltages are present at various locations within the server whenever an AC power
source is connected. This voltage is present even when the main power switch is in
the off position.
Failure to observe this warning could result in personal injury or damage to
equipment.
Failure to properly complete the steps in this procedure will result in erratic system behavior
CAUTION
or system failure. For assistance with this procedure contact your local HP Authorized Service
Provider.
Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
safety precautions could result in damage to the server.
Chapter 4
Removing and Replacing Components
QuickFind Diagnostic Board
111