Appendix A Safety Standards And Compliances - ATTO Technology 1500D/E Installation And Operation Manual

Appendix A Safety standards and compliances

The equipment described in this manual generates and uses radio frequency energy. If this equipment is
not used in strict accordance with the manufacturer's instruction, it can and may cause interference with
radio and television reception. See the Technical Specification sheet for a full list of certifications.
WARNING
Risk of explosion if battery is removed and/or replaced by an incorrect type. Dispose of used
batteries in accordance with your local environmental regulations.
No operator serviceable components inside the iPBridge 1500E/D or the 1550E/D.
Do not remove cover of iPBridge 1500D or the iPBridge 1550D. Refer servicing to qualified
personnel.
tested and found to comply with the limits for a Class A computing device pursuant to Subpart J
of Part 15 of FCC rules, which are designed to provide a reasonable protection against such
interference when operating in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference, in which case the user, at his own expense, will be
required to take whatever measures may be required to correct the interference.
If this equipment does cause interference to radio and television reception, which can be determined by
turning the equipment off and on, try to correct the interference by one or more of the following
measures
• Move the receiving antenna.
• Relocate the bridge with respect to the receiver,
or move the bridge away from the receiver.
• Plug the computer into a different outlet so the
computer and receiver are on different branch
circuits.
The booklet How to Identify and Resolve Radio/TV Interference Problems prepared by the Federal Com-
munications Commission is a helpful guide. It is available from the US Government printing office, Wash-
ington, DC 20402, Stock No. 004-000-00345-4.
Canadian Standards
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
i
ATTO Technology Inc. iPBridge Installation and Operation Manual
FCC Standards: Radio and Television Interference
WARNING
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause interference to radio communications. It has been
• If necessary, consult an ATTO authorized
dealer, ATTO Technical Support Staff, or an
experienced radio/television technician for
additional suggestions.