Multitargetmode - ATTO Technology 1500D/E Installation And Operation Manual

iSNSServer
Specifies whether the IP address of a valid iSNS server
from which the iPBridge will attempt iSCSI initiator
discovery. Setting to 0.0.0.0 will disable iSNS server
lookup.
Default: 0.0.0.0
Set syntax: set iSNSServer [xxx.xxx.xxx.xxx]
Requires a SaveConfiguration command
Get syntax: get iSNSServer

MultiTargetMode

Enables/disables iSCSI multiple target mode addressing
on the iPBridge. If enabled, all previous maps will be
deleted. In verbose mode, overwriting a map requires
secondary confirmation of the action.
Set syntax: set MultiTargetMode [enabled | disabled]
Get syntax: get MultiTargetMode
38
Configuration: CLI