Appendix C Safety Standards And Compliances - ATTO Technology iPBridge 2600 Installation And Operation Manual

Appendix C Safety standards and compliances

The equipment described in this manual generates and uses radio frequency energy. If this equipment
is not used in strict accordance with the manufacturer's instruction, it can and may cause interference
with radio and television reception. Refer to the Technical Specification sheet available at
for a full list of certifications.
www.attotech.com
WARNING
Risk of explosion if battery is removed and/or replaced by an incorrect type. Dispose of used
batteries in accordance with your local environmental regulations.
No operator serviceable components inside the iPBridge.
Do not remove cover of iPBridge. Refer servicing to qualified personnel.
communications. It has been tested and found to comply with the limits for a Class A computing device
pursuant to Subpart J of Part 15 of FCC rules, which are designed to provide a reasonable protection
against such interference when operating in a commercial environment. Operation of this equipment in
a residential area is likely to cause interference, in which case the user, at his own expense, will be
required to take whatever measures may be required to correct the interference.
If this equipment does cause interference to radio
and television reception, which can be determined
by turning the equipment off and on, try to correct
the interference by one or more of the following
measures
• Move the receiving antenna.
• Relocate the bridge with respect to the receiver,
or move the bridge away from the receiver.
The booklet How to Identify and Resolve Radio/TV Interference Problems prepared by the Federal Com-
munications Commission is a helpful guide. It is available from the US Government printing office, Wash-
ington, DC 20402, Stock No. 004-000-00345-4.
European Standards
Declaration of Conformity
This following statement applies to the ATTO iPBridge.
This device has been tested in the basic operating configuration and found to be
compliant with the following European Union standards
FCC Standards: Radio and Television Interference
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause interference to radio
Canadian Standards
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
• Plug the computer into a different outlet so the
computer and receiver are on different branch
circuits.
• If necessary, consult an ATTO authorized
dealer, ATTO Technical Support Staff, or an
experienced radio/television technician for
additional suggestions.
xvi