Table of Contents
Advertisement
Several processors control the flow of data in the ATTO iPBridge. The firmware to control these
processors can easily be upgraded in the field using the
The iPBridge firmware is distributed as a
compressed .zip file and can be obtained from the
ATTO Technology, Inc. web site at
.
www.attotech.com
To use FTP over GbE to flash new firmware into
the iPBridge
.zip
1
Uncompress the
ATTO Technology Inc. website
47
ATTO Technology Inc. iPBridge Installation and Operation Manual
2.4 Updating firmware
file obtained from the
command from an FTP connection.
PUT
(www.attotech.com) into an image file (
Note the filename.
2
Establish an FTP link to the bridge that is to be
flashed.
PUT
3
Use the
command to download the
firmware. For example
c:\bridge_firmware\I1500110.ima
4
Once the download is complete, cycle power on
the iPBridge to activate the new firmware.
.ima
).
Advertisement
Table of Contents
