Displaying Total Number Of Copies - Sharp MX-B200 Operation Manual

Program
No.
25
26
27
28
29
32
* Factory default settings are indicated with an asterisk (*).
5
Press the start (
will be steadily lit and the entered value will be stored.
6
Press the light (

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.
Press and hold down the clear key for approximately 5 seconds. The
total number of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
Downloaded From ManualsPrinter.com Manuals
Mode
Copy effective paper
width setting function
(Bypass tray)
Copy effective paper
width setting function
(Tray 1)
Copy effective paper
width setting function
(Tray 2)
(Only operates when
a lower paper tray is
installed.)
Selection of copy
start state (Polygon
rotation on/off)
Fusing temperature
setting when the
bypass tray is used
USB 2.0 mode
switching
) key. The right-hand number in the display
To change the setting or to set another mode, press the clear
key. The unit will return to step 2.
) key to return to the normal copy mode.
Parameters
*1 Large (A4 width),
2 Small (B5R width)
*1 Large (A4 width),
2 Small (B5R width)
*1 Large (A4 width),
2 Small (B5R width)
*1 ON, 2 OFF
1 Low, *2 High
1 Full-Speed, *2
64
Hi-Speed
7