Displaying Total Number Of Copies - Sharp AL-1451 Operation Manual

USER PROGRAMS
Press the print (
3
currently selected parameter number for the program will blink on the right side of the
display.
Select the desired parameter using the right copy quantity (
4
parameter number will blink on the right of the display.
Program
No.
4
Factory default settings are indicated with an asterisk (*).
Press the print (
5
the entered value will be stored.
Press the light (
6

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.
Press the clear (
1
Press and hold down the clear (
2
of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
26
) key. The entered program number will be steadily lit and the
Mode
1 Auto clear time
2 Preheat mode
3 Auto power shut-
off timer
4 Stream feeding
mode
5 Auto power shut-
off mode
) key. The right-hand number in the display will be steadily lit and
To change the setting or to set another mode, press the clear (
copier will return to step 2.
) or dark (
) key to reset the display to zero.
Parameters
0 OFF 1
3 90 sec. 4
0 30 sec. 1
0 2 min. * 1
3 30 min. 4
0 OFF * 1
0 OFF * 1
) key to return to the normal copy mode.
) key for approximately 5 seconds. The total number
) key. The entered
30 sec. * 2 60 sec.
120 sec. 5 10 sec.
60 sec. * 2 90 sec.
5 min. 2 15 min.
60 min. 5 120 min.
ON
ON
) key. The