Sharp MX-B200 Operation Manual page 56

Scanner driver settings
The scanner driver setup screen consists of the "Set-up screen", which lets you select
scan settings, and the "Preview screen", which shows the scanned image. For details
on the scan settings, click the "Help" button in the preview screen to display Help.
Set-up screen
1 "Scanning Source" menu
Select the location where the original is
placed. Selections are "Platen"
(document glass) or "SPF".
"Scanning from a TWAIN-compliant
application" (p.54)
"Scanning Mode" menu
2
Select "Standard" or "Professional" for
the scanning mode. For details on the
settings, click the "Help" button in the
preview screen to display Help.
"Zoom Preview" Checkbox
3
When this is selected, the selected part
of the preview image will be enlarged
when the "Preview" button is clicked. To
return to the regular view, remove the
checkmark.
"Zoom Preview" can be used
when "Platen" is selected in
the "Scanning Source" menu.
Downloaded From ManualsPrinter.com Manuals
1
2
3
4
5
6
56
4 "Preview" button
Previews the document.
If "Preview" is cancelled by
immediately pressing the [Esc]
key on your keyboard, or the
clear key on the machine,
nothing will appear in the
preview screen.
"Scanning" button
5
Click to scan an original using the
selected settings. Before clicking the
"Scanning" button, make sure the
settings are correct.
To cancel a scanning job after
clicking the "Scanning" button,
press the [Esc] key on your
keyboard, or the clear key on
the machine.
"Close" button
6
Click to close the scanner driver setup
screen.
6