Indicators On The Operation Panel - Sharp MX-B200 Operation Manual

ZOOM keys and indicator
16
Use to select any reduction or
enlargement copy ratio from 25% to
400% in 1% increments. (When the
SPF is being used, the zoom copy ratio
range is 50% to 200%.) (p.30)
Copy quantity keys
17
• Use to select the desired copy
quantity (1 to 99). (p.28)
• Use to make user program entries.
(p.63)

INDICATORS ON THE OPERATION PANEL

The start (
Start indicator
On:
Blinking: The indicator blinks in the following situations:
Off:
Power save indicator
On:
Blinking: Indicates that the unit is initializing (when the side cover is opened and
SCAN indicator
On:
Blinking: A scan job is being executed from the computer, or scan data is stored
Off:
Downloaded From ManualsPrinter.com Manuals
) indicator indicates the state of the printer or scanner.
SCAN indicator
Indicates the unit is ready for copying or scanning is being performed.
• When a print job is interrupted.
• When reserving a copy job.
• When toner is being replenished during a copy or print job.
The indicator is off in the following situations:
• During copying or scanning.
• The unit is in the auto power shut-off mode.
• When a misfeed or error has occurred.
• During print online.
Indicates the unit is in a power save mode.
closed or the power turned off and on).
The SCAN ( ) key has been pressed and the unit is in scanner mode.
in the unit's memory.
The unit is in the copy mode.
Clear key
18
• Press to clear the display, or press
during a copy run to terminate
copying. (p.28)
• Press and hold down during standby
to display the total number of copies
made to date. (p.64)
Start indicator
Power save indicator
6
1