Displaying Total Number Of Copies - Sharp AL-2021 Operation Manual

Program
No.
Copy effective paper
25 width setting function
(Bypass tray)
Copy effective paper
26 width setting function
(Paper tray)
Selection of copy
28 start state (Polygon
rotation on/off)
Fusing temperature
29 setting when the
bypass tray is used
USB 2.0 mode
32
switching
* Factory default settings are indicated with an asterisk (*).
5
Press the start (
will be steadily lit and the entered value will be stored.
To change the setting or to set another mode, press the clear
key. The unit will return to step 2.
6
Press the light (

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.
Press and hold down the clear key for approximately 5 seconds. The
total number of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
Mode
*1
2
*1
2
*1
1
1
) key. The right-hand number in the display
) key to return to the normal copy mode.
67
Parameters
Large (LETTER/A4 width),
Small (INVOICE/B5R width)
Large (LETTER/A4 width),
Small (INVOICE/B5R width)
ON, 2 OFF
Low, *2 High
Full-Speed, *2 Hi-Speed
7