Olivetti Jet-Lab 490 Instructions Manual page 17

Display
A two-line liquid crystal display
with a capacity of 16 characters
per line.
Shows operator prompts and er-
ror messages.
• Displays a list of the last 10 fax
or telephone numbers dialled
(outgoing calls) or the last 20
numbers from which calls have
been received (incoming
calls), irrespective of whether
or not a document was present
in the ADF.
Scroll "backwards" through the
•
values of a parameter.
Move the cursor to the "left" while
•
entering numbers and names.
•
•
With the fax machine connected to a private exchange:
-
• Unloads a document from the ADF.
• Turns off the "
• Returns the fax machine to the stand-by
mode.
Stops the programming, transmission, re-
•
ception or copying operation in progress.
Scroll "forwards" through the values of a parameter.
Move the cursor to the "right" while entering numbers and
names.
Before dialling the telephone or fax number, it provides
access to the public line. When pressed twice, it provides
access to the programmed network manager.
Dial the fax or telephone number.
•
Set any numeric data.
•
• Select digits and alphanumeric characters during the entry of
numbers and names.
" LED indicator.
•
•
•
•
• Used to dial a telephone or fax number without
lifting the telephone handset.
• Also activates the handsfree function.
Starts receiving a document.
After the fax number has been di-
alled, starts sending a document (only
with the document already inserted
in the ADF).
Confirms the selection of menus,
submenus, parameters and their val-
ues and moves on to the next condi-
tion.
Starts copying a document (only with
the document already inserted in the
ADF).
11