Table of Contents
Advertisement
B
ASIC TRANSMISSION AND RECEPTION OPERATIONS
Now that your fax machine has a name and number, you can
use it to:
•
send documents (also in broadcast mode, from the memory, or by
polling)
•
receive documents (also by polling)
•
make telephone calls (see the chapter "To make a call")
•
copy documents (see chapter "To make a copy").
T
O SEND A DOCUMENT
W
HAT DOCUMENTS MAY BE USED
Dimensions
•
Width
min. 210 mm - max. 216 mm
•
Length
min. 148 mm - max. 600 mm
Thickness
2
from:
80 gr/m
(max. 20 sheets)
60 - 90 gr/m
2
(max. 10 sheets)
50 - 140 gr/m
2
(1 sheet at a time)
For documents of a different size from those specified, you
can use a transparency with a rear sheet as a document holder.
N
EVER USE
•
curled paper
•
excessively thin paper
•
torn paper
•
damp or set paper
•
excessively small paper
•
crumpled paper
•
carbon paper
In addition, in order to avoid damaging your fax machine and invali-
dating your guarantee, make sure that the documents you are to use
do not contain:
•
staples
•
paper clips
•
adhesive tape
•
correcting liquid or glue that has not yet dried.
For all these cases, photocopy the document and send the copy.
12
T
O PLACE THE DOCUMENT IN THE ADF
1. Insert the automatic document feeder in the slot until it clicks into
position.
Insert the document, without forcing, in the ADF(automatic docu-
ment feeder) with the side to be sent facing upwards. The bottom
edge of the original is fed into the ADF and the display shows on
the top line:
and on the bottom line, the default contrast value: NORMAL.
T
O ADJUST THE CONTRAST AND RESOLUTION
Before sending a document you can make some adjust-
ments so as to optimize the printing quality.
T
O REGULATE THE CONTRAST
Until the display shows:
The display shows:
The display shows:
Until the display shows:
|
}
/
To view the other available options: "DARK" and "LIGHT".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
The contrast should be regulated on the basis of the
following criteria:
•
NORMAL, if the document is neither too light nor too
dark. "NORMAL" appears on the bottom line of the dis-
play.
•
LIGHT, if the document is dark. "LIGHT" appears on the
bottom line of the display.
•
DARK, if the document is light. "DARK" appears on the
bottom line of the display.
Advertisement
Table of Contents
Troubleshooting
