Console - Olivetti Jet-Lab 490 Instructions Manual

C
ONSOLE
• Inserts a pause during the dialling of the telephone or fax
number.
• After two numeric keys (01-52) have been pressed,
automatically dials (once set) the telephone or fax number
associated with them.
• Gives access to programming mode.
• Selects menus and submenus.
• After the button has been
pressed, they turn the speaker volume
"up" or "down".
With the handset lifted, gives access to the
special functions made available by the
network manager and commonly known
as REGISTER RECALL (R function).
10
•
•
•
•
• (
automatically dial (once set) the telephone or fax number
assigned to them (one-touch dialling function).
Blinking, indicates that the memory con-
tains documents that have not been printed.
Off, indicates that the memory is empty.
Adjusts the resolution of the documents to be sent
and copied (only with the document inserted in the
ADF).
Puts the line on hold during a telephone conversa-
tion (with the handset raised).
Cancels incorrect settings.
Turns off the microphone, during a "handsfree"
telephone call, so that the correspondent cannot hear
what is said at your end of the line.
- ) If pressed for more than a second,
• With tone dialling, they send a tone
down the line for special network serv-
ices.
They scroll "backwards" and "for-
•
wards" through characters and spe-
cial symbols during the entry of
names.
"Error" LED indicator
Signals an operating fault during transmission or
reception.