Olivetti Jet-Lab 490 Instructions Manual page 20

A
UTOMATIC REDIAL
If no connection is established due to line errors or because the
correspondent's number is busy, the fax machine automatically
redials the number of times laid down by the legislation in your
country.
T
O SEND A DOCUMENT AT A PRESET TIME
)
TRANSMISSION
This function enables you to solve time zone problems if
your correspondent is located thousands of kilometres away
and to avoid paying high prices by choosing time bands
when there is less traffic on the telephone lines.
Place the document in the ADF. The display shows on the
top line:
and on the bottom line, the default contrast value: NOR-
MAL.
The initial resolution value is: "
If you want, change the contrast and resolution values as
described previously.
Until the display shows:
The display shows:
- Enter the time at which you want to send the document. For
exemple "16:50".
The display shows:
- Dial your correspondent's number in any of the available
methods: directly on the numeric keypad or using the one-
touch keys ( -
one-touch and speed dialling").
To confirm the setting. The display shows "TX SET" for a
few seconds and then:
n o t e
You can delete the "broadcast transmission" setting by remov-
ing the document from the ADF or pressing the
n o t e
If there is a power failure, the broadcast transmission
will be cancelled.
14
(
DELAYED
" (standard).
) or speed dialling codes (see "To set
key.
T /
O CHANGE DELETE A BROADCAST TRANSMISSION THAT IS
ALREADY SET
Until the display shows:
The display shows:
The display shows:
If you want to delete the transmission set, press the
|/} keys: the display shows the message "CANCEL SET-
TING?", then press
machine automatically returns to the initial stand-by mode.
If you want to change the time at which the document is to be
sent or the number of the correspondent to whom you want
to send the document, take the following steps:
The display shows:
- Overwrite with the new time and then confirm the setting by
pressing the
ing the key. The display shows:
If you want to restore the current time, press the
the key and take the following step.
- Overwrite with the new number and confirm the setting by
pressing the
press the key, type the new number and confirm the
setting by pressing the
confirm the existing one by pressing the
away.
The display shows:
T
O SEND A DOCUMENT TO SEVERAL CORRESPONDENTS
The fax machine's memory allows you to send a document (even
at a preset time: "Delayed transmission") to several correspond-
ents (max. 10): "Broadcast transmission". See " To send a docu-
ment from the memory ".
to confirm deletion. The fax
key or confirm the existing time by press-
key
or
key
or
key straight
key,