Olivetti Jet-Lab 490 Instructions Manual page 31

T
O DISPLAY THE CALLER ID
This function, which may be activated by the telephone
company on request by the user, is only available in
some countries and conforms to the ETSI ETS 300
778-1 standard .
This function tells you immediately who is calling . In
this way, you will be able to decide whether to answer the
call or not.
When this function is enabled, if the fax machine is in stand-
by mode , whenever a call is received, it always shows
one of the following items of information :
• number or name of the correspondent who called
you;
PRIVATE : if the correspondent has chosen not to reveal
•
his identity to you;
NOT AVAILABLE : if the correspondent is connected to a
•
telephone exchange that does not support this service.
If you are programming your fax machine and, when an
incoming call is received, want to know who is calling
you , you must press the
the call.
It may however happen, if you are connected to a particu-
lar kind of telephone network, that the number of the caller is
not displayed on the fax machine. If this happens, call your
local customer engineering service centre.
The fax machine is already set up to display the caller
ID. You may however set it up not to display it, as follows:
Until the display shows:
The display shows:
The display shows:
Until the display shows:
| }
/ To view the other available option: "CALLER ID: OFF".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
N O T E
With this function enabled, if a power failure occurs and the
date and time are lost, they will be restored when the next call
is received.
key before answering
T
O CHANGE THE NUMBER OF RINGS
This function is only enabled in some countries.
If set in " PHONE/FAX " or " TAD/FAX " reception mode, when
an incoming call is received, the fax machine automatically
recognizes, after two rings , whether the call is being made
from another fax machine ( FAX ) or a telephone ( TEL ).
If you want, you can change the number of rings, as fol-
lows:
Until the display shows:
Until the display shows:
| }
/ To view the other available values: "01", "04", "06", "07"
and "08". For example: "04".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O CHANGE THE RING VOLUME
Until the display shows:
The display shows:
The display shows:
Until the display shows:
| }
/ To view the other available options: "RING VOLUME:LOW",
"RING VOLUME: MED" and "RING VOLUME:OFF". For
example: "RING VOLUME: MED".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
25