Nokia MOBILE TERMINAL Service Manual page 174

7. Repeat step 6. for Middle and High channels.
8. Ensure Tuning Results are within limits specified in the table below:
If values are OK, click Write to save the values.
Rx chain
Low
Frequency
High
Frequency
Alternative steps
• For sweep mode tuning, set Mode to Local in the Operating Mode dropdown menu.
• In the Tuning menu, choose WCDMA→ Rx Calibration .
• Click Start.
• Select Band, "WCDMA2100 or WCDMA900".
• Check the Sweep Mode box.
• Click Tune.
Page 4 –44
Band
2100 or 900
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Min Typ
-6 1.5 to 3.5
-5 -0.7 to 4.0
-5 -0.7 to 4.0
RM-356
RF troubleshooting
Max Unit
6 dB
5
5
Issue 1