The calibration has to be repeated for each GSM band.
Steps
1.
Connect the GSM connector of the module jig to a signal generator.
Phoenix service software.
2.
Start
3.
From the Operating mode drop-down menu, set mode to Local.
4.
Select GSM900 band.
5.
Choose Tuning→GSM→Rx Band Filter Response Compensation .
6.
Select Tuning mode: manual
7.
Click Start.
Page 4 –36
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
RM-356
RF troubleshooting
Issue 1