Figure 14: Authentication Server Operation - Digisol DG-GS1500E series Management Manual

Azteca 1000 web managed switch series
Table of Contents

Advertisement

pairs with associated privilege levels for each user that requires
management access to the switch.

Figure 14: Authentication Server Operation

Web
RADIUS/
TACACS+
server
P
ATH
Advanced Configuration, Security, Switch, Auth Method
U
G
SAGE
UIDELINES
The switch supports the following authentication services:
Authorization of users that access the Telnet, SSH, the web, or
console management interfaces on the switch.
Accounting for users that access the Telnet, SSH, the web, or
console management interfaces on the switch.
Accounting for IEEE 802.1X authenticated users that access the
network through the switch. This accounting can be used to provide
reports, auditing, and billing for services that users have accessed.
By default, management access is always checked against the
authentication database stored on the local switch. If a remote
authentication server is used, you must specify the authentication
method
and
the
authentication protocol on the Network Access Server Configuration
page. Local and remote logon authentication can be used to control
management access via Telnet, SSH, a web browser, or the console
interface.
When using RADIUS or TACACS+ logon authentication, the user name
and password must be configured on the authentication server. The
encryption methods used for the authentication process must also be
configured or negotiated between the authentication server and logon
client. This switch can pass authentication messages between the
server and client that have been encrypted using MD5 (Message-Digest
5), TLS (Transport Layer Security), or TTLS (Tunneled Transport Layer
Security).
– 57 –
C
HAPTER
1. Client attempts management access.
2. Switch contacts authentication server
3. Authentication server challenges client.
4. Client responds with proper password or key
5. Authentication server approves access.
6. Switch grants management access.
corresponding
parameters
4
| Configuring the Switch
Configuring Security
.
.
for
the
remote

Advertisement

Table of Contents
loading

Table of Contents