Configuring Ftp Settings - HIKVISION UD01171B User Manual

3. Configure the SNMP settings.
Note: The settings of the SNMP software should be the same as the settings you
configure here.
4. Click Save to save and finish the settings.
Notes:
•
A reboot is required for the settings to take effect.
•
To lower the risk of information leakage, you are suggested to enable SNMP v3
instead of SNMP v1 or v2.

7.2.2 Configuring FTP Settings

Purpose:
You can configure the FTP server related information to enable the uploading of the
captured pictures to the FTP server. The captured pictures can be triggered by events
or a timing snapshot task.
Steps:
1. Enter the FTP Settings interface: Configuration > Network > Advanced
Settings > FTP.
Network Camera User Manual
Figure 7-10 FTP Settings
71