Activating The Camera - HIKVISION UD01171B User Manual

 Refer to the Figure 2-2 to set network camera over the LAN via a switch or a
router.
or
Network Camera
or
Network Camera
半球
Figure 2-2 Connecting via a Switch or a Router

2.1.2 Activating the Camera

You are required to activate the camera first by setting a strong password for it before
you can use the camera.
Activation via Web Browser, Activation via SADP, and Activation via Client Software
are all supported.

Activation via Web Browser
Steps:
1. Power on the camera, and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to
enter the activation interface.
Notes:

The default IP address of the camera is 192.168.1.64.

For the camera enables the DHCP by default, the IP address is allocated
automatically. And you need to activate the camera via SADP software. Please refer to
Network Camera User Manual
Network Cable
半球
Figure 2-1 Connecting Directly
or
网络交换机
13
Computer
Computer