Canon imageprograf ipf755 User Manual page 128

Enhanced Printing Options
Important
• Borderless printing is only available with rolls.
• Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular
• Paper incompatible with the printer's auto cut function can be printed without borders on the left and
• These features cannot be used in combination with borderless printing: special page layouts, centering
• If Fit Paper Size or Print Image with Actual Size (Windows only) is selected when performing bor-
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be
2
• By factory default, the ink drying time is disabled for all paper. When you are using paper that takes
• Borderless Printing Method
Choose the method of borderless printing that suits the original, as desired.
• Scale to fit Roll Paper Width
Enlarge or reduce the original as a whole to match the roll paper width.
Note
112
• You can combine this function with rotating pages 90 degrees before printing so that the original width
For instructions on borderless printing of photos, images, and other documents to match the roll paper width, refer to
the following topics, as appropriate for your computer and operating system.
• Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)
• Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)
Borderless Printing by Resizing Originals to Fit the Roll Width
Downloaded from ManualsPrinter.com Manuals
> Borderless Printing >
widths. For information on types of paper compatible with borderless printing, refer to the Paper Refer-
ence Guide. (See " Types of Paper
right sides only.
originals, and printing cut lines on rolls.
derless printing, Rotate Page 90 degrees (Conserve Paper) cannot be selected.
uneven at the edges. If you require higher image quality, specify No in Auto Cut in the printer driver. In
this case, the paper can be printed without borders on the left and right sides only. After ejecting and
cutting the printed document, use scissors to cut away the top and bottom edges.
longer for ink to adhere for borderless printing and the Cutter Unit touches printing surfaces that are not
dry yet, it may damage the paper or the edge of the document that is cut, depending on frequency of use.
In this case, follow these steps to change the ink drying time.
• On the Main sheet of the printer driver, click Settings in Media Type.
• Select the ink drying time in the Between Pages list of Drying Time.
(relative to portrait orientation) matches the roll paper width in borderless printing.
")
→P.626
→P.113
→P.115
iPF755