Hp-Gl/2 Problems - Canon imageprograf ipf755 User Manual

Troubleshooting >

HP-GL/2 problems

Printed colors of lines are inaccurate during HP-GL/2 printing
AdjustFaintLines is On in the
Control Panel menu.
HP-GL/2 jobs are printed 6 mm larger than specified
The page size of the HP-GL/2 print job, as created in the
source application, is incorrect.
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
The page size of the HP-GL/2 print job, as
created in the source application, is incor-
rect.
HP-GL/2 printing takes a long time
Large print jobs with a lot of data take longer to print.
A job was printed when Input Resolution in the Con-
trol Panel menu was set to 600dpi.
12
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
The printer is analyzing the print job.
A job was printed when Input Resolution in the
Control Panel menu was set to 600dpi.
868
Printed colors of lines are inaccurate during HP-GL/2 printing
Downloaded from ManualsPrinter.com Manuals
>
Cause
Setting AdjustFaintLines to Off in the Control Panel menu may help produce the
expected results. However, lines in some colors may appear broken.
Cause
Cause
Cause
Cause
Corrective Action
In the Control Panel menu, set PageSizeProcess1 to On.
(See "Menu Settings.")
Corrective Action
In the Control Panel menu, set PageSizeProcess2 or Conserve Paper to
On.
The layout will be changed to the optimal layout.
(See "Menu Settings.")
→P.738
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi
and print again.
(See "Menu Settings.")
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi and
print again.
(See "Menu Settings.")
Corrective Action
→P.738
Corrective Action
→P.738
Corrective Action
→P.738
iPF755