Error Message
>
Other Messages
Other Messages
Top cover is open. .......................................................................................................................................... 901
Prepare for parts replacement. ....................................................................................................................... 901
Unknown file. ................................................................................................................................................... 901
Multi-sensor error ............................................................................................................................................ 902
Error in cutter position. .................................................................................................................................... 902
GARO Wxxxx (x represents a number)
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
An error requiring service may have occurred.
13
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job.
900
The paper was not advanced because the trailing edge is ta-
ped to the roll.
Fastening tape or the Belt Stopper has not been removed in-
side the Top Cover.
GARO Wxxxx (x represents a number)
Downloaded from ManualsPrinter.com Manuals
>
Cause
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Cause
Cause
Corrective Action
Corrective Action
Write down the error code and message, turn off the printer, and con-
tact your Canon dealer for assistance.
Turn off the printer and remove the roll from the print-
er before restoring power.
Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
Corrective Action
iPF755