Canon imageprograf ipf755 User Manual page 760

Control Panel > Printer Menu
GL2
Set-
tings
9
744
Menu Settings
Downloaded from ManualsPrinter.com Manuals
>
Setting Item
Quality Color Monochrome
Man- Mode
Color (CAD) 1
ager
Color (CAD) 2
Color (CAD) 3
Color (CAD) 4
Color (CAD) 5
Print Quality
Input Resolution
Print (Economy)
Paper Paper Source
Man-
Margin
ager
Conserve Paper
Auto Rotate
Nesting Use Nesting
Nesting WaitTime
Cut Lines
Line & Enable merge
Pen
Man-
ager
Pen Select Palette
Setup
Description, Instructions
Print in monochrome.
Print in standard colors.
Print in brighter colors.
Print emulating the following printers, in colors re-
sembling colors produced by these printers: Canon BJ-
W3000/W3050.( *2 )
→P.750
Print emulating the HP Designjet 500/800, in colors
resembling colors produced by these printers.
( *2 )
→P.750
Print emulating the HP Designjet 1000, in colors re-
sembling colors produced by this printer.
( *2 )
→P.750
Choose the print quality.
Choose the printer input resolution, 600dpi or 300dpi.
Although printing quality is diminished, less ink is
consumed than in regular printing. Select On to con-
serve ink.
Choose the source of paper for HP-GL/2 printing.
Specify the margin around paper. The margin for the
trailing edge of sheets is 23 mm (0.9 in).
However, if you have specified the leading margin in
Paper Details, the value in Paper Details has priori-
ty.
Conserves paper when printing.
If the long side of an original is shorter than the roll
width, the original is automatically rotated 90 degrees
to conserve paper. Similarly, if the long side of an
original in landscape orientation is longer than the roll
width and the short side is shorter than the roll width,
the original is repositioned to fit on the paper.
HP RTL print jobs are not rotated. Because HP RTL
images are not rotated even if the paper is rotated 90
degrees, images may be cut off or the blank paper may
be ejected. In this case, set Auto Rotate to Off.
Selecting On will store print jobs until multiple docu-
ments can be arranged to fill up the roll width, instead
of printing each print job as it is received.
Specify a time to wait until printing, as desired.
Select On to print cut lines between each document on
the roll.
Specify whether to merge or print over colors where
lines overlap.
Choose Off to print the second line over the first.
Choose On to merge all overlapping colors.
As pen values, choose Software, Palette A, Palette B,
or Factory.
iPF755