Canon imageprograf ipf755 User Manual page 759

Adjust Feed
Printer Priori-
ty
Main- Head Cleaning
te-
nance
Nozzle Check
Replace P.head
Repl. maint cart
Head Info
iPF755
Downloaded from ManualsPrinter.com Manuals
Setting Item
Adj. Auto(GenuinePpr)
Quality
Auto(OtherPaper)
Manual
Adjust Adjust- A:High
Length ment-
B:Standard/Draft
Print
Chang A:High
e Set-
B:Standard/Draft
tings
Control Panel
Description, Instructions
Specify this mode with paper identified in the Paper
Reference Guide.
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount. (See "Automatic
Banding Adjustment (Adj. Quality).")
Specify this mode with paper not in the Paper Refer-
ence Guide.
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount. Note that this func-
tion takes more time and consumes more ink than Au-
to(GenuinePpr). (See "Automatic Banding Adjust-
ment (Adj. Quality).")
→P.688
Use this mode with highly transparent media or other
paper for which Auto(GenuinePpr) or Auto(Other-
Paper) cannot be used.
Print a test pattern for adjustment of the feed amount
based on the type of paper. (See "Manual Banding
Adjustment (Adj. Quality).")
Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
which you enter the amount of adjustment. (See "Ad-
justing Line Length (Adjust Length).")
Displayed when you have selected Feed Priority >
Adj. Priority > Print Length.
Adjustment relative to the amount of stretching or
shrinkage of the current paper.
Enter either the adjustment results from Adjustment-
Print or the discrepancy that you measured (as a per-
centage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount by
choosing a lower adjustment value.
Clean the Printhead. (See "Cleaning the Printhead.")
→P.808
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or
if printing is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
When replacing the Printhead, choose Yes and follow
the instructions on the screen. (See "Replacing the
Printhead.")
→P.809
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen. (See
"Replacing the Maintenance Cartridge.")
→P.817
Indicates information about the printhead.
> Printer Menu >
→P.688
→P.689
→P.692
Menu Settings
9
743