System Set-Up Menus - Raymarine a65 Operation Instructions Manual

Multifunction display lighthouse ii
Table of Contents

Advertisement

5.8 System set-up menus

The system set-up menus enable you to configure your display and connected external devices.
The following menus are available:
Menu item
Touch-Lock
Alarms
Fuel Manager
Pilot Controls
Pilot Response
Audio Controls
Ground Trip Resets
System Settings
Maintenance
Customizing your display
Description
Enables you to lock the touchscreen of a
touch only display when the display is paired
with a remote keypad.
Note: This option is not available on
touch-only displays which do not have a
remote keypad connected.
Note: This option is not available on
displays which have physical buttons.
Display the Alarm Manager. Refer to
8 Alarm management
Displays the Fuel manager page
Displays the Pilot Control dialog.
Enables selection of the pilot response level
when connected to an Evolution autopilot.
Note: Pilot Response is not available on
SPX and SeaTalk autopilots.
Displays the audio controls pop-up.
Note: Not available on non-touch
displays.
Resets the chosen ground trip distance
counter to zero.
Enables you to configure the settings for
external devices connected to the display.
Provides diagnostic information. Also enables
you to designate the data master and reset
the display to factory settings.
Notes
• ON
• OFF (default)
Chapter
Only available when a Raymarine autopilot
is detected on the system and Autopilot
Control is set to On.
• Leisure
• Cruise
• Performance
Only available when connected to an audio
device via bluetooth.
79

Advertisement

Table of Contents
loading

Table of Contents